山东三所新材料技术有限公司

一、制作衣服架子

1、 Making clothes racks

为了后续步骤的顺利实施，我们要先做一个衣服架子使得衣服能伸展平整便于后续制作步骤的实施

For the smooth implementation of the subsequent steps, we need to first make a clothes rack so that the clothes can be stretched and flattened for the implementation of the subsequent production steps

1.把衣服放在硬纸板上铺平整，然后用记号笔在硬纸板上画出衣服的大样来。

1. Lay the clothes flat on cardboard, and then use a marker to draw a large sample of the clothes on the cardboard.

2.按照那也大样来裁剪硬纸板。

2. Cut the cardboard according to the sample.

3.后修剪合适大小塞入衣服内，使衣服显得平整。

3. Trim to the appropriate size and insert into the clothes to make them appear flat.

二、制作衣服耐磨层纸样

2、 Make a pattern for the wear-resistant layer of clothing

为了爬行时使得衣服比较耐磨，衣服上经常接触地面的部分需要增加一层耐磨层，这样也能隔绝地面上的湿气传入衣服内部，使得狙击手趴在地上难受。

In order to make the clothes more wear-resistant when crawling, a wear-resistant layer needs to be added to the parts of the clothes that frequently come into contact with the ground, which can also isolate moisture from the ground from entering the interior of the clothes, making it difficult for snipers to lie on the ground.

1把裁纸样的白卡纸放在衣服上，下方与衣角线齐平。

1. Place the cut pattern white cardboard on the clothes, with the bottom flush with the hem line.

2卡纸左边边界一纽扣眼为界（拉链式的以拉链的缝合线为界)

2. The left boundary of the cardboard is defined by a button eye (zipper style is defined by the stitching of the zipper)

3决定耐磨层上方的高度后，在卡纸上画一道横线。

After determining the height above the wear-resistant layer, draw a horizontal line on the cardboard.

4右方沿上衣外侧锋线画上线条

Draw a line along the outer front line of the top on the right side

5把纸样团剪出，在复制一块，便成了一对后对称的耐磨层纸样。

Cut out 5 pieces of paper samples and replicate them to create a pair of symmetrical wear-resistant layer paper samples.

6右手扣扳机者，于右肩膀出一缺口，使得枪托可抵押着肩膀。（左撇子的话就把扣扳机的那侧留此缺口）

The person who pulls the trigger with his right hand makes a gap in his right shoulder, allowing the butt of the gun to be secured against his shoulder. (If left handed, leave this gap on the side that pulls the trigger)

7耐磨层灰色部分大与纸样相同，只不过是沿内线像内缩5cm便可。

The gray part of the 7 wear-resistant layer is as large as the paper sample, but it can be shrunk 5cm along the inner line image.

三、缝合

3、 Suture

把做耐磨层的帆布按照纸样裁剪完成后，就缝合在衣服的相应位置上（山东三所新材料厂家认为，您如果手工不好的话就交给专门的人士去做吧）。

After cutting the canvas for the wear-resistant layer according to the paper pattern, it is sewn onto the corresponding position of the clothes (Shandong Three New Material Manufacturers believe that if your hand is not good, you can hand it over to a specialized person to do it).

1用双面胶带把耐磨层与填充物粘贴在一起（就是那个防潮垫），在放于相对位置，便可开始缝合操作。

1. Use double-sided tape to stick the wear-resistant layer and filling material together (that is, the moisture-proof pad), and place it in the opposite position to start the stitching operation.

2一些野战服袖子上已经有耐磨补丁，这时便可把补丁上端的缝线拆去，把填充物塞进去，在缝合起来就完成了。

Some field uniforms already have wear-resistant patches on their sleeves. At this point, the stitching on the top of the patch can be removed, the filling material inserted, and the stitching is completed.

3完成品的大概样子。

The approximate appearance of the completed product.

在野外做伪装作用的伪装服制作相关事项就讲解到这里了，您对此有怎样的疑惑或者需求就来我们网站http://www.csdssc.com咨询了解吧！

That's all for the production of camouflage suits for camouflage in the wild. If you have any doubts or needs, please come to our website http://www.csdssc.com Consult and understand!