山东三所新材料技术有限公司

为更大程度上的呵护充气模型产品，请在开始安装充气之前，在地上预铺一些旧的地毯，从而更大程度上的隔绝沙地或地面对充气模型产品的磨损。

To provide greater care for the inflatable model product, please pre lay some old carpets on the ground before installing the inflatable model, in order to isolate the sand or ground from the wear and tear of the inflatable model product to a greater extent.

山东充气模型产品充气成型后，请勿断电。风机进风口不得有杂物，以免卷入造成风机受损。经常检查使用情况，风机有异常响动应立即停机查看原因，排除故障后方可使用。

Do not power off the Shandong inflatable model product after inflation molding. There should be no debris at the inlet of the fan to prevent it from getting entangled and causing damage to the fan. Regularly check the usage. If there is any abnormal noise in the fan, it should be stopped immediately to check the cause and troubleshoot before use.

在移动充气模型产品的时候，切忌生拉硬拽充气模型底部，为避免增加更多不必要的磨损，再移动充气模型产品的时候，如果充气模型太沉，可以多人一起抬起移动，或者将里面的沙袋拿出来，再移动产品。

When moving inflatable model products, it is important to avoid pulling or forcefully dragging the bottom of the inflatable model. To avoid unnecessary wear and tear, if the inflatable model is too heavy, multiple people can lift and move it together, or remove the sandbags inside before moving the product.

充气模型容易撕拉，稳固性相对来说比较低。所以在遇到强风大雨的情况下，切勿充气使用。充气模型造型越大，受风及外在的影响也越大。高度10米以上充气物，5级风以上切勿充放。

Inflatable models are easy to tear and have relatively low stability. So in the event of strong winds and heavy rain, do not inflate it for use. The larger the shape of the inflatable model, the greater the influence of wind and external factors. Inflatable objects with a height of more than 10 meters should not be inflated or placed under wind conditions of level 5 or above.

充气模型属于充气产品，在使用充气模型产品的时候，请远离尖锐物品。充气模型的稳固，也基本上是以沙袋为主，切忌使用其他尖锐的物品来替换。例如：石头，铁架等等。

Inflatable models belong to inflatable products. When using inflatable model products, please stay away from sharp objects. The stability of the inflatable model is mainly based on sandbags, and it is strictly prohibited to use other sharp objects for replacement. For example: stones, iron frames, etc.

充气模型产品在长期摆放室外的情况下，切忌白天黑夜的长时间充气。临时收起充气模型产品的时候，打开拉链盖，让充气模型产品自行的放气，切忌强制性的压挤充气模型产品以达到快速放气的目的。

When inflatable model products are placed outdoors for a long time, it is important to avoid prolonged inflation during the day and night. When temporarily retracting the inflatable model product, open the zipper cover to allow the inflatable model product to deflate on its own. Do not forcefully squeeze the inflatable model product to achieve rapid deflation.

放气结束后，请在充气模型产品上压盖沙袋，同时确保庞大的充气模型产品没有刮蹭到路面或者其他围栏等障碍物之上。更多相关内容就来我们网站http://www.csdssc.com咨询了解吧！

After the deflation is completed, please cover the sandbag on the inflatable model product and ensure that the large inflatable model product does not scratch the road surface or other obstacles such as fences. For more related content, come to our website http://www.csdssc.com Consult and understand!