伪装网的外观质量评定主要包括：骨架网质量、伪装网面质量、热隔绝层质量及伪装网整体外观质量等。
The appearance quality evaluation of professional camouflage nets mainly includes: skeleton net quality, camouflage net surface quality, thermal insulation layer quality, and overall appearance quality of camouflage nets.
一、架网：
1、 Grid:
骨架网的外观质量应符合下列要求：
The appearance quality of the skeleton mesh should meet the following requirements:
A。在100mm长一段骨架网绳内有三股以上的纱(或线)断裂,则该段骨架网绳被认为是断裂。销架网上网绳断裂应不多于4处，胴--网目或相邻网目内应不出现1处以上的网绳断裂。
A. If there are more than three strands of yarn (or thread) broken within a 100mm long section of the skeleton mesh rope, the section of the skeleton mesh rope is considered broken. There should be no more than 4 breakage of the mesh rope on the sales rack, and no more than 1 breakage of the mesh rope should occur within the frame mesh or adjacent mesh.
B.网绳打结(网目结点除外)或松捻,在每片骨架网上应不多于8处，铜-网目相邻网目内应不出现1处以上打结或松捻。
B. The knot or loose twist of the mesh rope (excluding mesh nodes) should not exceed 8 places on each skeleton mesh, and there should be no more than 1 knot or loose twist within the adjacent mesh of copper mesh.
二、伪装网面：
2、 Camouflage mesh surface:
伪装网面的外观质量应符合下列要求：
The appearance quality of the camouflage mesh surface should meet the following requirements:
A。不应有宽度大于3mm.长度大于500mm的漏底、色条和色档(10mm宽布包边除外);
A. There should be no bottom leakage, color strips, or color barriers with a width greater than 3mm and a length greater than 500mm (excluding 10mm wide cloth edge wrapping);
B.宽度为1~3mm.长度为(100~500)mm的漏底、色条和色档在2m的面积内不多于1条;
B. There shall be no more than one bottom leakage, color strip, and color barrier with a width of 1-3mm and a length of (100-500) mm within an area of 2m;
C。伪装网面的表面不应有面积大于20mm的气泡。
C. The surface of the camouflage mesh should not have bubbles with an area greater than 20mm.
三、热隔绝层：
3、 Thermal insulation layer:
热隔绝层的外观质量应符合下列要求：
The appearance quality of the thermal insulation layer should meet the following requirements:
A.热隔绝层内外表面的涂层不应有宽度大于5mm.长度大于500mm的漏底、色条、和色档,宽度为(1~5)mm的漏底、色条.和色档在2m的面积内应不多于1条;
A. The coating on the inner and outer surfaces of the thermal insulation layer should not have a width greater than 5mm, a length greater than 500mm, and a width of (1-5) mm. There should be no more than 1 leakage, color strip, and color bar within an area of 2m;
B.热隔绝层表面不应有面积大于20mm的气泡：
B. The surface of the thermal insulation layer should not have bubbles with an area greater than 20mm:
C.不应有面积大于眼脸孔两倍的破洞和长度大于15mm的裂缝：
C. There should be no holes with an area greater than twice the size of the eyelids and no cracks with a length greater than 15mm:
D.眼睑联结部撕裂30%以上,则该眼睑被认为是断裂;眼脸断裂的眼脸孔数量应不大于总眼脸孔数量的5%;
D. If the eyelid junction is torn by more than 30%, the eyelid is considered broken; The number of broken eyelids should not exceed 5% of the total number of eyelids;
E.固定绳不应有3股以上的断线。
E. The fixed rope should not have more than 3 broken strands.
四、伪装网整体：
4、 Camouflage net overall:
伪装网整体的外观质量应符合下列要求：
The overall appearance quality of the camouflage net should meet the following requirements:
A.伪装网的各种颜色应符合技术文件或合同的要求;
A. The various colors of the camouflage net should meet the requirements of technical documents or contracts;
B.切花形式应符合技术文件的要求，切口长度有30%以上未切开则被认为是不合格：
B. The cut pattern should meet the requirements of the technical documents, and if more than 30% of the cut length is not cut, it is considered unqualified:
C.装饰片应该技术文件的规定进行绑扎,每片伪装网上漏绑处应不多于50处，且不能有连续的漏绑;
C. Decorative pieces should be bound according to the technical documents, and there should be no more than 50 missing binding points on each piece of camouflage net, and there should be no continuous missing binding;
D.边绳上不允许3股以上的线共断裂处：
D. No more than 3 strands of wire are allowed to break together on the edge rope:
E.加强绳上不允许有3股的线共断裂处：
E. Three strands of wire are not allowed to break together on the reinforcing rope:
F.四角的加强布应按技术文件进行缝制。
F. The reinforcing fabric at the four corners should be sewn according to the technical documents.
That's all for the evaluation of the appearance quality of the camouflage website. I hope it can help you. If there are any other matters, please come to our website http://www.csdssc.com Consult and understand!
山东三所新材料技术有限公司
分类中心
